You are currently viewing How a Magnetic Closure Rigid Box Is Made, Step by Step

How a Magnetic Closure Rigid Box Is Made, Step by Step

Short answer: a magnetic closure box is a rigid box with a hinged front flap that stays shut with magnets hidden inside the board. It is made in eight main stages: designing the structure, cutting the greyboard, forming the base tray, printing and finishing the wrap paper, wrapping the tray, building the hinged cover with the magnets set into the board, joining the base to the cover, and fitting the insert. Most of the quality you feel, such as straight corners, a smooth wrap and a flap that closes with a firm “click”, comes from careful work at each stage.

Open blue magnetic closure rigid box with a black foam insert, made by BOXART in Dubai
A magnetic closure rigid box with a custom-cut insert, made at BOXART in Dubai.

What is a magnetic closure box?

A magnetic closure box, also called a book-style or flap box, has two parts: a rigid base tray that holds the product, and a one-piece cover that wraps around the back of the tray and folds over the top as a flap. Thin magnets are set into the edge of the flap and into the front of the base, so the box closes neatly without ribbons or clasps. Because it opens like a book, it gives a smooth, premium unboxing for perfume, jewellery, watches, cosmetics and corporate gifts.

How a magnetic closure box is made, step by step

1. Structure and dieline

Everything starts with the product. Its exact size decides the inside dimensions of the tray, and the type of insert decides how deep the box must be. The structure is drawn as a flat layout (a dieline) showing every panel, fold and glue area. For a new design, a blank or printed sample is usually made first so the fit and the closing action can be checked.

2. Cutting the greyboard

Rigid boxes are built from thick, dense greyboard. The board is cut into the panels needed: the base and walls of the tray, and the front, spine and back boards of the cover. Accurate cutting matters, because even a small error shows as gaps or uneven edges once the box is wrapped.

3. Forming the base tray

The tray walls are folded up and the corners are joined and reinforced so the tray stays square. This creates the solid body of the box that will hold the product and the insert.

4. Printing and finishing the wrap paper

The outside of a rigid box is a sheet of paper wrapped over the board. It can be printed in full colour, or it can be a coloured or textured specialty paper with no printing at all. Finishes such as lamination, foil stamping and embossing are usually applied to this wrap. A gold foil logo on the flap, for example, is stamped before the paper goes onto the board.

5. Wrapping the tray

Glue is applied to the wrap paper, the tray is placed on it, and the paper is folded up the walls and tucked over the top edges. The corners need particular care: the paper should be tight, with no bubbles, creases or visible glue.

6. Building the hinged cover and setting the magnets

The cover boards (back, spine and front flap) are laid on their wrap paper with small gaps between them, which become the hinges. The magnets are placed in recesses in the board of the front flap and in the matching position on the front of the base, so they line up when the box closes. The paper is then folded over and an inside liner is added, which hides the magnets completely.

Closed black magnetic closure rigid box, made by BOXART in Dubai
Closed, the flap sits flush and the magnets are hidden inside the board.

7. Joining the base and cover

The wrapped tray is glued onto the inside of the back panel of the cover. Its position decides how neatly the flap lines up with the front of the box, so it has to be exact.

8. Fitting the insert, checking and packing

Inserts hold the product in place and make the opening look finished. Common options are foam (often EVA) cut to the shape of the product, card inserts, and velvet- or satin-covered inserts. Each box is then checked for straight corners, clean wrapping, even hinges and a firm magnetic close, and packed so the boxes are not crushed in transit.

What affects the quality and cost of a magnetic box?

FactorWhy it matters
Board thicknessThicker board feels heavier and more premium, and protects better
Wrap paperPrinted art paper, coloured specialty paper, textured or leather-look papers each change the look and cost
FinishesFoil stamping, embossing and lamination add steps and cost
InsertCustom-cut foam, card or velvet inserts are made to the exact product
Size and quantityLarger boxes use more material; larger runs spread the setup cost
Magnet strength and positionDecides whether the flap closes firmly and sits flush

Frequently asked questions

Are the magnets visible?

No. In a well-made box the magnets sit inside the board and are covered by the wrap paper and inside liner, so you only feel the closing action.

Can a magnetic box be shipped flat?

A standard magnetic box is delivered fully assembled. Collapsible versions exist that fold flat for shipping and are opened out before packing, but they are a different construction and should be requested at the start.

Can I add my logo with foil or embossing?

Yes. BOXART makes magnetic closure boxes in Dubai with foil stamping, embossing and custom inserts, so the logo, the finish and the fit can all be matched to your product.

Which products suit a magnetic closure box?

Perfume and oud, jewellery, watches, cosmetics sets, pens, gift sets and corporate or VIP gifts, where the opening experience is part of the product.

Summary

A magnetic closure box is a rigid box with a hinged flap held shut by hidden magnets. It is made by cutting greyboard, forming and wrapping a base tray, building a hinged cover with the magnets set inside, joining the two and fitting a custom insert. The result is a box customers keep, which keeps your brand in front of them.

Planning a magnetic box? Send your product size, quantity and deadline through our quote form or on WhatsApp at +971 58 881 3323. You can also see real samples at our showroom in Al Qusais Industrial Area 5, Dubai.